Die casting mold releasing lubricant

INCREASING THE QUALITY AND PRODUCTIVITY OF DIE CAST PRODUCTS

Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Die casting mold releasing lubricant GRAPHACE is indispensable in releasing heated metals from molds. This product is used in die-cast machines used to cast aluminum automotive parts and magnesium parts and contributes to improvements to both productivity and the environment.

  • Die casting
  • GRAPHACE
  • GRAPHACE
 
 

General purpose type

These products have an established reputation for ease of use and for producing excellent colors and shine on product surfaces and can contribute to productivity improvements.

Product List

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
235M - 0.99 Milky white liquid Good spread. Low nozzle clogging and mold polluting. 9~11
TX-3 5 0.99 Milky white liquid Main componet : special silicone oil. Prevent burning at a high temperature. 9.5
MS-10 5.1 0.98 White liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution. 9.9 リンク

High releasing property type

These products can form a favorable mold release film even when the mold temperature is high. Out of all our products, these ones excel the most in terms of their capability to prevent products from affixing to mold surfaces. These products can be used to improve your productivity in a variety of ways such as by shortening machine cycles and by reducing the amount of coating that is required.

Product List

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
TX-2400 1.5 1.00 Milky white liquid Form a homogeneous releasing film in the wide range temperature of mold. 10
GL-3700 1.5 1.00 Milky white liquid Good drying properties at low temperature of the mold. Form a uniform releasing film. Reduce cycle time and remaining water. 9.8

Environment-focused type

These products minimize mold stickiness and deposits, which improves the cleanliness of the machine vicinity and of the molds themselves. What's more, these products do not clog spray nozzles and filters, which contributes to productivity by reducing the time required to perform maintenance and similar operations on molds.

Product List

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
CD-21A 3.5 0.99 White liquid Small mold deposition. Suitable for products for covers. 8.2 リンク
TX-5500 - 0.99 Milky white liquid Dry quickly. Excellent cooling effect and adhesion of the releasing componet. 7~10
TX-5700 0.99 Milky white liquid Suppress the thermal degradation. Reduce the seizure. Eliminates the problem of mold deposition at low temperature region.

Special type

 

This product minimizes the temperature decrease of the molten metal, which improves the capability of the metal to flow. This product also has a high effect of generating low amounts of gas for parts such as safety-critical parts, which enables it to contribute to high-quality die casting.

 

Product List

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
WK-620T 490 1.05 Milky white liquid Excellent lubrication and anti-seizure. 8~10

Powder releasing agent

Because the mold is closed when these products are coated, the cycle time can be reduced, which improves productivity. Also, these products do not use any water, so there is no need for fluid waste disposal.

Product List

ASTROLUBE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
GW-23 0.18 Dark gray Powder release agent available for squeeze casting, low pressure casting, gravity casting, aluminum casting.
NDP-1 0.28 Pale white Powder release agent for low speed casting. High adhesion. Low gas generation.

For magnesium

These products have excellent lubricating properties and improve the capability of molten metal to flow. This improves the colors and shine on the surfaces of thin products and helps to reduce product failure rates.

Product List

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
MK-400 4.4 0.99 Milky white liquid Superior in heat retention of white solid mold. Improve fluidity. Good lubricity. 8.7
MK-700 6.1 0.99 Milky white liquid Suitable for thixomolding method. 8.8

For zinc

This product is used a great deal with extremely thin products such as covers and can contribute to shortening the time spent maintaining molds because it generates minimal deposits on the molds.

Product List

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
HC-100 79.04 0.9 Pale yellow Dilutable with water and kerosene. Low stain of mold. リンク

Water-soluble stock solution coating type

This type is not diluted, which makes it extremely stable. It also reduces your waste liquids because only a minimal amount is used to coat molds and contributes to production cost reductions because it increases the service life of your molds. It also shortens the air blowing time, which contributes greatly to cycle time improvements.

Product List

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
UDS-100 1.00 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Versatile. 9.7
UDS-200 1.00 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Good adhesion at high temperature and seizure resistance. 9.9
UDS-300 <10 0.99 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Low deposition. 9.6

DELPON series

Please contact our Functional fluids sales department.

Product List