Cutting fluid

PRODUCTS WITH LONG SERVICE LIVES AND REDUCED WASTE MATERIALS

Cutting fluids are used when metals or similar materials are cut and made into finished products by machine tools such as lathes, machining centers, and grinding machines. MORESCO is developing cutting fluids that have long service lives, which reduces the amount of waste fluid that is generated and thereby contributes to environmental improvements.

  • 切削油剤
  • 切削
  • 切削加工
  • ウォーターRⅡ
  • 切削
  • 切削加工
  • ウォーターRⅡ
 
 

Alkaline electrolyzed water only additive

This additive agent dedicated for use with alkaline electrolyzed water has excellent machining properties.

Product List

Oilwater RⅡ

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.061 None Turbidity pale yellow Suitable for difficult-to-cut materials and iron-based materials. Possible to use as an alternative to non-water-soluble cutting oil. Equivalent to A2-1

Synthetic type

When diluted with water, this type becomes transparent. This type excels in terms of separability with other oils, has a minimal cloudiness, and maintains transparency as a fluid for a long time. This synthetic product has a long service life and therefore generates a small amount of waste material.

Product List

Synthetic type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.06 None Yellow Suitable for general-purpose cutting of cast iron and general steel. Equivalent to A2-1
- 1.04 None Pale yellow Suitable for heavy cutting of cast iron, general steel. Equivalent to A2-1

Emulsion type

When diluted with water, this type becomes cloudy, like milk. This type has excellent lubricating properties and is mainly composed of a large amount of base oils and surfactants.

Product List

Emulsion type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 0.95 None Brown Emulsion. Anti-foaming type. Equivalent to A1-1
- General purpose emulsion type. Equivalent to A1-1
- 0.97 None Brown Microemulsion type. Improved stickness around the machine. Equivalent to A1-1

Soluble type

When diluted with water, this type becomes transparent or semi transparent. This type has excellent washing properties and is mainly composed of a, relatively speaking, large amount of surfactants with a small amount of base oils mixed in.

Product List

Soluble type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1 None Pale green Mainly suitable for processing of cast iron. Equivalent to A2-1
- 0.95 None Pale brown Mainly suitable for processing of aluminum and general steel. Equivalent to A2-1
- 0.97 None Brown For aluminum mainly. Especially improve the aluminum compatibility. Equivalent to A2-1

Chemical solution type

When diluted with water, this type becomes completely transparent. This type has excellent washing and cooling properties and is mainly composed of inorganic salt.

Product List

Chemical solution type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.05 None Yellow General-purpose type for grinding. Equivalent to A.3-1
- 1.07 None Pale yellow Low-pH type. Suitable for fragile materials. Equivalent to A.3-1
- 1.08 None Yellow Suitable for the grinding of super hard material. Equivalent to A.3-1