Cars

A specialty field where MORESCO boasts a number of products with the leading share of the domestic Japanese market

Cars

MORESCO has an approximately 50 percent share of the domestic Japanese market for die casting liquids and an approximately 70 percent share of that for fire resistant hydraulic fluids. Our base oil for heat-resistant grease used around engines is a one-of-a-kind product that is used in almost all Japanese-made cars produced worldwide. Other products such as our cutting fluids and hot melt adhesives for use in automobile interiors are also highly rated for their quality and technological responsiveness.

 

Product List

Lubricant for hot forging

LUBCASTER

Product No. pH Specific gravity g/cm3 Appearance merit & use Product Information
F-20 approx 8.5 1.2 Light yellow transparent mucoid fluid Usable with high dilution by the high adhesion property, suitable to low temperature mold.
F-670 approx 9 1.15 Light yellow transparent mucoid fluid Applicable to wide range of shape, and also to high temperature mold.
F-500 approx 8.5 1.15 Light yellow transparent liquid fluid Balance the adhesion and low build up property .
F-550 approx 9 1.14 Light yellow transparent liquid fluid Balance lubricity and low build up property.
F-780 approx 9 1.20 Light yellow transparent mucoid fluid Excellent in high lubricity and easy for mold maintenance
F-870 approx 9 1.17 Light yellow transparent mucoid fluid Best Grade products with high lubricity even equal to Graphite type.

Die casting mold releasing lubricant

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
235M - 0.99 Milky white liquid Good spread. Low nozzle clogging and mold polluting. 9~11
TX-3 5 0.99 Milky white liquid Main componet : special silicone oil. Prevent burning at a high temperature. 9.5
MS-10 5.1 0.98 White liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution. 9.9 リンク
TX-2400 1.5 1.00 Milky white liquid Form a homogeneous releasing film in the wide range temperature of mold. 10
GL-3700 1.5 1.00 Milky white liquid Good drying properties at low temperature of the mold. Form a uniform releasing film. Reduce cycle time and remaining water. 9.8
CD-21A 3.5 0.99 White liquid Small mold deposition. Suitable for products for covers. 8.2 リンク
TX-5500 - 0.99 Milky white liquid Dry quickly. Excellent cooling effect and adhesion of the releasing componet. 7~10
TX-5700 0.99 Milky white liquid Suppress the thermal degradation. Reduce the seizure. Eliminates the problem of mold deposition at low temperature region.
WK-620T 490 1.05 Milky white liquid Excellent lubrication and anti-seizure. 8~10
MK-400 4.4 0.99 Milky white liquid Superior in heat retention of white solid mold. Improve fluidity. Good lubricity. 8.7
MK-700 6.1 0.99 Milky white liquid Suitable for thixomolding method. 8.8
HC-100 79.04 0.9 Pale yellow Dilutable with water and kerosene. Low stain of mold. リンク
UDS-100 1.00 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Versatile. 9.7
UDS-200 1.00 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Good adhesion at high temperature and seizure resistance. 9.9
UDS-300 <10 0.99 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Low deposition. 9.6

ASTROLUBE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
GW-23 0.18 Dark gray Powder release agent available for squeeze casting, low pressure casting, gravity casting, aluminum casting.
NDP-1 0.28 Pale white Powder release agent for low speed casting. High adhesion. Low gas generation.
RCP-1 0.3 Gray Suppress the contact of the sleeve and molten metal. Prevent the occurrence of the solidified layer. Promoting the fluidity of the molten metal.

Plunger lubricant

NEOCASTER

Product No. viscosity mPa•s
(30℃)
density
g/cm3
Flash point ℃ Appearance merit & use Product Information
CF-W2 31 0.98 None Pale yellow Non-wax type. Reduce the stain of machine. リンク
SP-35 0.98 None Milky white liquid Suitable for small and medium-sized machine.
SP-70 40 0.99 None White liquid Good adhesion in the sleeve. Excellent spreadability. Form a good lubricating film. Suitable for medium and large-sized machine.
PW-60 1765 1 None Dark gray liquid Available for medium and large-sized machine. リンク
PW-80 800 1 None Dark gray liquid Suitable for medium-sized machine. リンク
PW-100 826 1 None Gray liquid Suitable for large-sized machine of over 1000t. Good spreadability and adhesion.
AQ-G 1777 0.99 None Dark gray liquid Non-wax type. Reduce deposition around machine and pipe clogging. リンク
RE-76 1400 0.96 None Milky white liquid Suitable for large-sized machine. Excellent lubricity. リンク
RE-77 720 0.96 None Milky white liquid Suitable for small and medium-sized machine. リンク
N-20 860 0.89 266 Pale yellow Suitable for medium-sized machine. Good lubricity. リンク
P-400 620 0.9 >200 Pale yellow Suitable for small and medium-sized machine. Improve the work environment.
BW-150 3000 0.93 270 Brown Suitable for medium-sized machine. Available for magnesium casting. リンク
NW-101 1600 0.94 160 Brown Low viscosity. Suitable for small and medium-sized machine. リンク
W-15 1600 0.96 250 Pale yellow Excellent heat resistance. Suitable for medium and large-sized machine.
PWS-850 1200 1.01 >200 Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
B-200R 2600 1.01 254 Black General purpose type. リンク
B-200A 1200 1.01 300 Black Excellent viscosity characteristics. Suitable for winter and cold region. リンク
GP-Z 1200 0.96 >200 Black Precipitation of graphite is less likely to occur by special distributed processing.
DL-505 0.6 White For small and medium-sized machine. Suppress the generation of flame and smoke. Improve factory environment.
DL-520 0.6 White For medium and large-sized machine. Suppress the generation of flame and smoke. Improve factory environment.

Cutting fluid

Synthetic type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.06 None Yellow Suitable for general-purpose cutting of cast iron and general steel. Equivalent to A2-1
- 1.04 None Pale yellow Suitable for heavy cutting of cast iron, general steel. Equivalent to A2-1

Emulsion type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 0.95 None Brown Emulsion. Anti-foaming type. Equivalent to A1-1
- General purpose emulsion type. Equivalent to A1-1
- 0.97 None Brown Microemulsion type. Improved stickness around the machine. Equivalent to A1-1

Soluble type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1 None Pale green Mainly suitable for processing of cast iron. Equivalent to A2-1
- 0.95 None Pale brown Mainly suitable for processing of aluminum and general steel. Equivalent to A2-1
- 0.97 None Brown For aluminum mainly. Especially improve the aluminum compatibility. Equivalent to A2-1

Chemical solution type

Product No. density
g/cm3
Flash point ℃ Appearance merit & use JIS Product Information
- 1.05 None Yellow General-purpose type for grinding. Equivalent to A.3-1
- 1.07 None Pale yellow Low-pH type. Suitable for fragile materials. Equivalent to A.3-1

NEOCOOL CUTTINGSTAR

NEOCOOL

Hydraulic fluid

HYDOL

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
HAW 51 Red clear liquid Water-glycol hydraulic fluid with a flame-retardant and high lubricity. Available in a high-pressure area of 14-25MP discharge pressure. 10.2 -47.5 リンク
H-200 38 Red clear liquid Water-glycol hydraulic fluid with excellent performance balance.Performance in the discharge pressure less than 14MP. 10.2 -47.5 リンク
HAW-32 32 Red clear liquid Low-viscosity water-glycol hydraulic fluid. Suitable for use of machine tool. 10.2 -47.5 リンク

HYDOL X-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- General-purpose hydraullic fluid.

HYDOL AW-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- Wear resistance hydraulic fluid.

High vacuum pump oil

NEOVAC

Product No. kinematic viscosity
mm2/s
(40℃)
Flash point ℃ merit & use Color
(ASTM)
Vapor pressure
Pa(Torr) (50℃)
Product Information
MR-100 44.6 230 Standard for small pump. L0.5 1.3X10-2 or less (1X10-4) リンク
MR-200 71 256 Standard for ratary pump. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250 105 270 Standard for large pump. 1 1.3X10-3 or less (1X10-5) リンク
ST-200 73.5 252 Improved sludge dispersion, heat and oxidation resistance. (Moisture suction is not supported) L2.5 1.3X10-2 or less (1X10-4) リンク
MR-200A 71 252 Improved heat and oxidation. Moisture suction is supported. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250A 105 270 Improved heat and oxidation. Moisture suction is supported. For large pump. L1.5 1.3X10-3 or less (1X10-5) リンク
SO-M 63.7 254 Excellent heat and oxidation resistance. L0.5 4X10-4 or less (3X10-6) リンク
SO-H 95 285 High viscosity than SO-M. L0.5 4X10-5 or less (3X10-7) リンク
SA-L 30 240 Low viscosity than SA-M. L0.5 4X10-4 or less (3X10-6) リンク
SA-M 65 260 Improved oxidation stability of SO-M. L1.0 4X10-4 or less (3X10-6) リンク
SA-H 95 285 Improved oxidation stability of SO-H. L1.0 4X10-5 or less (3X10-7) リンク
SX 235 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
SY 250 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
ME-250 14 188 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
DB-12 24 210 For surface treatment equipment. (vapor deposition, sputter) リンク
EP-83 83 250 For gear lubrication of a mechanical booster pump. L1.0 1.3X10-3 or less (1X10-5) -
GREASE Sealing grease of vacuum equipment.

MORESCO-EXCELLOL

Product No. kinematic viscosity
mm2/s
(40℃)
mean
molecular
weight
Flash point ℃ merit & use Vapor pressure
Pa(Torr) (25℃)
Ulrimate pressure Product Information
54 約446 300 For precision analysis equipment. (electron microscopy, mass spectrometer) 7X10-9 or less (5X10-11)

Hot melt adhesive

MORESCO-MELT

Product No. merit & use Main ingredient Color Packing Product Information
RO-180 For difficulty adhesion material (polypropylen) Pale yellow 2.5kg aluminum pack
TN-624Z For non-woven fabric/resin, difficulty adhesion Pale yellowish white Excell coat
TN-729Z Heat resistance general type Yellowish brown Excell coat
TN-903S Sticky tipe Pale yellow Excell coat
RAC-30Z Heat resistance. For door trim. Pale yellow Excell coat
RU-705 PUR hot melt. Heat resistance. Pale yellow 3kg aluminum pack リンク

Synthetic lubricating oils for use as lubricating oils and as grease base oils

MORESCO HILUBE

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
LB-15 15.8 0.945 214 L 0.5 -
LB-32 32.3 0.922 226 L 0.5 -
LB-68 68.5 0.905 258 L 0.5 -
LB-100 102 0.895 286 L 0.5 リンク
L-150 0.896 284 リンク
L-320 0.897 276 リンク
LE-150 0.917 272 リンク
LE-320 0.918 268 リンク
RX-150 0.89 280 リンク

S-3105

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 290 1.2 280 L 0.5 リンク

S-3103

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 120 1.17 260 L 0.5

S-3101

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 240 1.02 310 L 0.5

S-3230

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 410 0.952 312 リンク

Grease

MORESCO HIGREASE

Product No. Product Information
UM-1 リンク