Building materials

Also used in shops and houses

Building materials

MORESCO's high temperature lubricating oils are used in facilities that manufacture plaster board, which is used as a fire-retardant building material, and exterior walls, while our die casting fluids and cutting fluids are used in the manufacture of door closers, door knobs, and similar products. Our environmentally friendly non-organic hot melt adhesives are attracting attention in building material assembly applications.

 

Product List

Die casting mold releasing lubricant

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
235M - 0.99 Milky white liquid Good spread. Low nozzle clogging and mold polluting. 9~11
TX-3 5 0.99 Milky white liquid Main componet : special silicone oil. Prevent burning at a high temperature. 9.5
MS-10 5.1 0.98 White liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution. 9.9 リンク
CD-21A 3.5 0.99 White liquid Small mold deposition. Suitable for products for covers. 8.2 リンク
TX-5500 - 0.99 Milky white liquid Dry quickly. Excellent cooling effect and adhesion of the releasing componet. 7~10
TX-5700 0.99 Milky white liquid Suppress the thermal degradation. Reduce the seizure. Eliminates the problem of mold deposition at low temperature region.
MK-400 4.4 0.99 Milky white liquid Superior in heat retention of white solid mold. Improve fluidity. Good lubricity. 8.7
MK-700 6.1 0.99 Milky white liquid Suitable for thixomolding method. 8.8
HC-100 79.04 0.9 Pale yellow Dilutable with water and kerosene. Low stain of mold. リンク
UDS-100 1.00 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Versatile. 9.7
UDS-300 <10 0.99 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Low deposition. 9.6

Plunger lubricant

ASTROLUBE

Product No. viscosity mPa•s
(30℃)
density
g/cm3
Flash point ℃ Appearance merit & use Product Information
RCP-1 Gray Suppress the contact of the sleeve and molten metal. Prevent the occurrence of the solidified layer. Promoting the fluidity of the molten metal.

NEOCASTER

Product No. viscosity mPa•s
(30℃)
density
g/cm3
Flash point ℃ Appearance merit & use Product Information
CF-W2 31 0.98 None Pale yellow Non-wax type. Reduce the stain of machine. リンク
SP-35 0.98 None Milky white liquid Suitable for small and medium-sized machine.
SP-70 40 0.99 None White liquid Good adhesion in the sleeve. Excellent spreadability. Form a good lubricating film. Suitable for medium and large-sized machine.
PW-60 1765 1 None Dark gray liquid Available for medium and large-sized machine. リンク
PW-80 800 1 None Dark gray liquid Suitable for medium-sized machine. リンク
PW-100 826 1 None Gray liquid Suitable for large-sized machine of over 1000t. Good spreadability and adhesion.
AQ-G 1777 0.99 None Dark gray liquid Non-wax type. Reduce deposition around machine and pipe clogging. リンク
RE-76 1400 0.96 None Milky white liquid Suitable for large-sized machine. Excellent lubricity. リンク
RE-77 720 0.96 None Milky white liquid Suitable for small and medium-sized machine. リンク
N-20 860 0.89 266 Pale yellow Suitable for medium-sized machine. Good lubricity. リンク
P-400 620 0.9 >200 Pale yellow Suitable for small and medium-sized machine. Improve the work environment.
BW-150 3000 0.93 270 Brown Suitable for medium-sized machine. Available for magnesium casting. リンク
NW-101 1600 0.94 160 Brown Low viscosity. Suitable for small and medium-sized machine. リンク
W-15 1600 0.96 250 Pale yellow Excellent heat resistance. Suitable for medium and large-sized machine.
PWS-850 1200 1.01 >200 Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
B-200R 2600 1.01 254 Black General purpose type. リンク
B-200A 1200 1.01 300 Black Excellent viscosity characteristics. Suitable for winter and cold region. リンク
GP-Z 1200 0.96 >200 Black Precipitation of graphite is less likely to occur by special distributed processing.
DL-505 0.6 White For small and medium-sized machine. Suppress the generation of flame and smoke. Improve factory environment.
DL-520 0.6 White For medium and large-sized machine. Suppress the generation of flame and smoke. Improve factory environment.

Hydraulic fluid

HYDOL X-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- General-purpose hydraullic fluid.

HYDOL AW-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- Wear resistance hydraulic fluid.

High vacuum pump oil

NEOVAC

Product No. kinematic viscosity
mm2/s
(40℃)
Flash point ℃ merit & use Color
(ASTM)
Vapor pressure
Pa(Torr) (50℃)
Product Information
MR-100 44.6 230 Standard for small pump. L0.5 1.3X10-2 or less (1X10-4) リンク
MR-200 71 256 Standard for ratary pump. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250 105 270 Standard for large pump. 1 1.3X10-3 or less (1X10-5) リンク
ST-200 73.5 252 Improved sludge dispersion, heat and oxidation resistance. (Moisture suction is not supported) L2.5 1.3X10-2 or less (1X10-4) リンク
MR-200A 71 252 Improved heat and oxidation. Moisture suction is supported. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250A 105 270 Improved heat and oxidation. Moisture suction is supported. For large pump. L1.5 1.3X10-3 or less (1X10-5) リンク
SO-M 63.7 254 Excellent heat and oxidation resistance. L0.5 4X10-4 or less (3X10-6) リンク
SO-H 95 285 High viscosity than SO-M. L0.5 4X10-5 or less (3X10-7) リンク
SA-L 30 240 Low viscosity than SA-M. L0.5 4X10-4 or less (3X10-6) リンク
SA-M 65 260 Improved oxidation stability of SO-M. L1.0 4X10-4 or less (3X10-6) リンク
SA-H 95 285 Improved oxidation stability of SO-H. L1.0 4X10-5 or less (3X10-7) リンク
SX 235 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
SY 250 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
ME-250 14 188 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
DB-12 24 210 For surface treatment equipment. (vapor deposition, sputter) リンク
EP-83 83 250 For gear lubrication of a mechanical booster pump. L1.0 1.3X10-3 or less (1X10-5) -
GREASE Sealing grease of vacuum equipment.

MORESCO-EXCELLOL

Product No. kinematic viscosity
mm2/s
(40℃)
mean
molecular
weight
Flash point ℃ merit & use Vapor pressure
Pa(Torr) (25℃)
Ulrimate pressure Product Information
54 約446 300 For precision analysis equipment. (electron microscopy, mass spectrometer) 7X10-9 or less (5X10-11)

High temperature lubricating oils and greases

MORESCO HILUBE

Product No. density
g/cm3
Flash point ℃ Appearance merit & use ISO viscosity grade Consistency No. Product Information
L-150 0.896 284 Pale yellow High temperature region of ~270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). 150 リンク
L-320 0.897 276 Pale yellow High temperature region of ~271℃. For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). 320 リンク
LM-150 0.882 266 Pale yellow Middle-high temperature region of 200℃ or less. For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film 150 -
LM-320 0.885 262 Pale yellow Middle-high temperature region of 201℃ or less.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film 320 -
LE-150 0.917 272 Pale yellow High temperature region of ~270℃. For food machinery (Tunnel oven), textile machinery (heat setter), biaxial stretching machine (film tenter). 150 リンク
LE-320 0.918 268 Pale yellow High temperature region of ~271℃. For food machinery (Tunnel oven), textile machinery (heat setter), biaxial stretching machine (film tenter). 320 リンク
MO-150 0.902 278 Grayish black For food machinery (Tunnel oven), drying construction material and sludge of sewage (rotary kiln), gear box. 150 リンク
MO-320 0.904 272 Grayish black For food machinery (Tunnel oven), drying construction material and sludge of sewage (rotary kiln), gear box. 320
MO-560 0.903 262 Grayish black For food machinery (Tunnel oven), drying construction material and sludge of sewage (rotary kiln), gear box. 560
LS-150E 0.974 256 Yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). 150 -
LS-320E 0.978 256 Yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). 320 -
RX-150 0.89 280 Pale yellow High temperature region of ~270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). リンク
R-150 0.980 264 Pale yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). リンク
R-220 0.969 266 Pale yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). リンク

Grease

MORESCO HIGREASE

Product No. Product Information
UM-1 リンク