Electronics

Used in a diverse range of applications

Electronics

MORESCO products are used in a diverse range of applications including molding, lubricating, protecting, sealing, fixing, and degassing. They are widely used in everything from manufacturing processes to finished products. In the case of PCs, for example, our die casting liquids are used to mold cases while our vacuum pump oils are used to manufacture semiconductors and our motor bearing oils and hard disk surface lubricants are used in hard drives.

 

Product List

Die casting mold releasing lubricant

GRAPHACE

Product No. kinematic viscosity
mm2/s
(40℃)
viscosity mPa•s
(30℃)
density
g/cm3
Bulk density
g/cm3
Appearance merit & use pH Product Information
235M - 0.99 Milky white liquid Good spread. Low nozzle clogging and mold polluting. 9~11
TX-3 5 0.99 Milky white liquid Main componet : special silicone oil. Prevent burning at a high temperature. 9.5
MS-10 5.1 0.98 White liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution. 9.9 リンク
TX-2400 1.5 1.00 Milky white liquid Form a homogeneous releasing film in the wide range temperature of mold. 10
GL-3700 1.5 1.00 Milky white liquid Good drying properties at low temperature of the mold. Form a uniform releasing film. Reduce cycle time and remaining water. 9.8
CD-21A 3.5 0.99 White liquid Small mold deposition. Suitable for products for covers. 8.2 リンク
TX-5500 - 0.99 Milky white liquid Dry quickly. Excellent cooling effect and adhesion of the releasing componet. 7~10
TX-5700 0.99 Milky white liquid Suppress the thermal degradation. Reduce the seizure. Eliminates the problem of mold deposition at low temperature region.
HC-100 79.04 0.9 Pale yellow Dilutable with water and kerosene. Low stain of mold. リンク
UDS-100 1.00 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Versatile. 9.7
UDS-300 0.99 Milky white liquid Undiluted water soluble concentrate coated type mold release agent. Low deposition. 9.6

Plunger lubricant

ASTROLUBE

Product No. viscosity mPa•s
(30℃)
density
g/cm3
Flash point ℃ Appearance merit & use Product Information
RCP-1 Gray Suppress the contact of the sleeve and molten metal. Prevent the occurrence of the solidified layer. Promoting the fluidity of the molten metal.

NEOCASTER

Product No. viscosity mPa•s
(30℃)
density
g/cm3
Flash point ℃ Appearance merit & use Product Information
CF-W2 31 0.98 None Pale yellow Non-wax type. Reduce the stain of machine. リンク
SP-35 0.98 None Milky white liquid Suitable for small and medium-sized machine.
SP-70 40 0.99 None White liquid Good adhesion in the sleeve. Excellent spreadability. Form a good lubricating film. Suitable for medium and large-sized machine.
PW-60 1765 1 None Dark gray liquid Available for medium and large-sized machine. リンク
PW-80 800 1 None Dark gray liquid Suitable for medium-sized machine. リンク
PW-100 826 1 None Gray liquid Suitable for large-sized machine of over 1000t. Good spreadability and adhesion.
AQ-G 1777 0.99 None Dark gray liquid Non-wax type. Reduce deposition around machine and pipe clogging. リンク
RE-76 1400 0.96 None Milky white liquid Suitable for large-sized machine. Excellent lubricity. リンク
RE-77 720 0.96 None Milky white liquid Suitable for small and medium-sized machine. リンク
N-20 860 0.89 266 Pale yellow Suitable for medium-sized machine. Good lubricity. リンク
P-400 620 0.9 >200 Pale yellow Suitable for small and medium-sized machine. Improve the work environment.
BW-150 3000 0.93 270 Brown Suitable for medium-sized machine. Available for magnesium casting. リンク
NW-101 1600 0.94 160 Brown Low viscosity. Suitable for small and medium-sized machine. リンク
W-15 1600 0.96 250 Pale yellow Excellent heat resistance. Suitable for medium and large-sized machine.
PWS-850 1200 1.01 >200 Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
B-200R 2600 1.01 254 Black General purpose type. リンク
B-200A 1200 1.01 300 Black Excellent viscosity characteristics. Suitable for winter and cold region. リンク
GP-Z 1200 0.96 >200 Black Precipitation of graphite is less likely to occur by special distributed processing.
DL-505 0.6 White For small and medium-sized machine. Suppress the generation of flame and smoke. Improve factory environment.
DL-520 0.6 White For medium and large-sized machine. Suppress the generation of flame and smoke. Improve factory environment.

Hydraulic fluid

HYDOL

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
HAW 51 Red clear liquid Water-glycol hydraulic fluid with a flame-retardant and high lubricity. Available in a high-pressure area of 14-25MP discharge pressure. 10.2 -47.5 リンク
H-200 38 Red clear liquid Water-glycol hydraulic fluid with excellent performance balance.Performance in the discharge pressure less than 14MP. 10.2 -47.5 リンク
HAW-32 32 Red clear liquid Low-viscosity water-glycol hydraulic fluid. Suitable for use of machine tool. 10.2 -47.5 リンク

HYDOL X-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- General-purpose hydraullic fluid.

HYDOL AW-series

Product No. kinematic viscosity
mm2/s
(40℃)
Appearance merit & use pH Pour point ℃ Product Information
- Wear resistance hydraulic fluid.

High vacuum pump oil

NEOVAC

Product No. kinematic viscosity
mm2/s
(40℃)
Flash point ℃ merit & use Color
(ASTM)
Vapor pressure
Pa(Torr) (50℃)
Product Information
MR-100 44 230 Standard for small pump. L0.5 1.3X10-2 or less (1X10-4) リンク
MR-200 71 256 Standard for ratary pump. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250 105 270 Standard for large pump. 0.5 1.3X10-3 or less (1X10-5) リンク
ST-200 76 252 Improved sludge dispersion, heat and oxidation resistance. (Moisture suction is not supported) L2.0 1.3X10-2 or less (1X10-4) リンク
MR-200A 71 252 Improved heat and oxidation. Moisture suction is supported. L0.5 1.3X10-3 or less (1X10-5) リンク
MR-250A 105 270 Improved heat and oxidation. Moisture suction is supported. For large pump. L0.5 1.3X10-3 or less (1X10-5) リンク
SO-M 64 264 Excellent heat and oxidation resistance. L0.5 4X10-4 or less (3X10-6) リンク
SO-H 95 285 High viscosity than SO-M. L0.5 4X10-5 or less (3X10-7) リンク
SA-L 32 240 Low viscosity than SA-M. L0.5 4X10-4 or less (3X10-6) リンク
SA-M 64 260 Improved oxidation stability of SO-M. L0.5 4X10-4 or less (3X10-6) リンク
SA-H 95 280 Improved oxidation stability of SO-H. L0.5 4X10-5 or less (3X10-7) リンク
DR-M 70 234 For vacuum CVD. Excellent inhibitory effect of thickning. L1.5 1.3X10-2 or less (1X10-4) リンク
SA 38 254 For environmental measurement equipment. Excellent heat and oxidation resistance. L2.5 6.5X10-2 or less (5X10-4)
SX 22 235 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
SY 26 240 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
ME-250 13 188 For surface treatment equipment. (vapor deposition, sputter, heat treatment) リンク
DB-12 24 212 For surface treatment equipment. (vapor deposition, sputter) リンク
EP-83 84 260 For gear lubrication of a mechanical booster pump. L1.0 1.3X10-3 or less (1X10-5) -
MC-400 160 280 For center valve lubrication of fluorescent and bulb manufacturing equipmanet. L2.0 リンク
MC-600 250 298 For center valve lubrication of fluorescent and bulb manufacturing equipmanet. L2.5 リンク
MC-1000 430 320 For center valve lubrication of fluorescent and bulb manufacturing equipmanet. L3.0 リンク
GREASE Sealing grease of vacuum equipment.

MORESCO-EXCELLOL

Product No. kinematic viscosity
mm2/s
(40℃)
mean
molecular
weight
Flash point ℃ merit & use Vapor pressure
Pa(Torr) (25℃)
Ulrimate pressure Product Information
54 290 約446 300 For precision analysis equipment. (electron microscopy, mass spectrometer) 7X10-9 or less (5X10-11)

Hot melt adhesive

MORESCO-MELT

Product No. merit & use Main ingredient Color Packing Product Information
RAC-30Z Heat resistance. For door trim. Pale yellow Excell coat
AC-90 Excellet liquidity. Possible to coat at low temperature White Pellet
AC-831Z For pleat general type White Excell coat
AC-857 Good heat resistance and sagging. High viscosity. Foam corresponding. White Excell coat リンク
TN-210Z Bond of the rock wool and glass wool to PE film (spray coating) Yellow Excell coat

High temperature lubricating oils and greases

MORESCO HILUBE

Product No. density
g/cm3
Flash point ℃ Appearance merit & use ISO viscosity grade Consistency No. Product Information
L-150 0.896 284 Pale yellow High temperature region of ~270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). 150 リンク
L-320 0.897 276 Pale yellow High temperature region of ~271℃. For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). 320 リンク
LS-150E 0.974 256 Yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). 150 -
LS-320E 0.978 256 Yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). 320 -
BS-32 0.921 228 Pale yellow For bearing of sintered metal, impregnated moter bearing, lubrication of precision machinery. 32
BS-46 0.912 238 Pale yellow For bearing of sintered metal, impregnated moter bearing, lubrication of precision machinery. 46
BS-68 0.903 256 Pale yellow For bearing of sintered metal, impregnated moter bearing, lubrication of precision machinery. 68
BS-100 0.897 286 Pale yellow For bearing of sintered metal, impregnated moter bearing, lubrication of precision machinery. 100 リンク
RX-150 0.89 280 Pale yellow High temperature region of ~270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter). リンク
R-150 0.980 264 Pale yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). リンク
R-220 0.969 266 Pale yellow For food machinery (tunnel oven), textile machinery (heat setter), drying construction material (oven and dryer). リンク

Synthetic lubricating oils for use as lubricating oils and as grease base oils

S-3105

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 290 1.2 280 L 0.5 リンク

S-3103

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 120 1.17 260 L 0.5

S-3101

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 240 1.02 310 L 0.5

S-3230

Product No. kinematic viscosity
mm2/s
(40℃)
density
g/cm3
Flash point ℃ Color
(ASTM)
Color Product Information
- 410 0.952 312 リンク

Grease

MORESCO HIGREASE

Product No. Product Information
GK-1

Hard disk surface lubricant

MORESCO PHOSFAROL

Product No. Product Information
A-20H series

Organic device sealant

MORESCO MOISTURE CUT

Product No. Product Information
-