MORESCO Sustainability ManagementMORESCO Green SX Certified Products
MORESCO evaluates the entire life cycle of a product, from the procurement of raw materials to disposal, and certifies a product as "MORESCO Green SX" if it has a particularly significant contribution to our seven materialities.
By developing and expanding sales of MORESCO Green SX products, we will implement initiatives aimed at realizing a sustainable society and contribute to the sustainability of our customers.
SX Contribution Category |
Major Examples | Relevant MORESCO Materiality Initiatives |
Relevant SDGs |
---|---|---|---|
Reduction of CO2 emissions |
|
|
![]() |
Energy conservation |
|
|
![]() |
Environmental conservation |
|
|
![]() |
Building of a better workplace |
|
|
![]() |
Health and safety |
|
|
![]() |
Contribution to industrial development |
|
|
![]() |
MORESCO Green SX Certification Standards and Flow
We evaluate the entire life cycle of a product, from the procurement of raw materials to disposal, certifying a product as "MORESCO Green SX" if it has a particularly significant contribution to our seven materialities and reduces the impact on the environment.
Products submitted by each division are reviewed by an internal review board consisting of management, the heads of each division, and others, and are then officially certified by the Sustainability Committee. Certification and operation are verified by a third party and evaluated for validity.

Sales Goal KPIs
As of fiscal 2023, MORESCO Green SX products accounted for 33% of sales.
We are making good progress toward achieving our interim target of 40% for fiscal 2026.
We will continue working to improve existing products and develop new products in order to achieve our target for fiscal 2030.
FY2022 Results |
FY2023 Results |
... | FY2026 Target |
FY2030 Target |
29% | 33% | ... | 40% | 50% |
---|

MORESCO Green SX Representative Products
Water-soluble minimum quantity spray type release agent
GRAPHACE MQ Series
Generally, mold release agents are diluted tens to hundreds of times, but the products developed by our company are not diluted, making them extremely stable. Since only a very small amount is applied, waste liquid is reduced and a longer mold life is achieved, reducing production costs.
Compared to general release agents, this product reduces petrochemical-derived raw materials by 38% per product produced by the customer.
This contributes to improving the work environment by reducing compressor power consumption, reducing the amount of mold release mist scattered, and reducing noise.

Water-glycol fire-resistant hydraulic fluid
HYDOL
Our hydraulic fluid has excellent lubricity and stability, as well as highly balanced performance, which contributes to the stable operation of hydraulic equipment requiring precise operation. It is especially optimal in workplaces where there is a risk of fire.
We have also been working on reuse and recycling efforts, as hydraulic fluid that has deteriorated over time must be treated as industrial waste and the environmental impact of incineration has been a problem. We have developed a technology that extracts only the deteriorated additives that make up 20% of the fluid and recycles the remaining clean water-glycol components. In addition to reducing the amount of petrochemical-derived raw materials used through the recovery and reuse of hydraulic fluid, this significantly reduces waste.
Furthermore, the introduction of biomass PG contributes to the reduction of CO2 emissions.

Water Soluble Cutting Fluids
MORESCO TOOLMATE GR-5
Unique special additives suppress the solidification and floating of glass powder. In addition to reducing problems on peripheral equipment such as centrifugal separators, exchange work hours are reduced to 1/4. Many proven results have been seen in the glass machining sector.

Reactive hot melt
MORESCO-MELT RO-400
A reactive hot melt that hardens due to moisture contained in the air or adherends.
It is mainly used for adhesion for automobile interiors.
Having excellent coating properties, it can be applied by bead or spray.
It contributes to improving productivity and reducing energy use by eliminating the need for a drying process after coating, as well as improving the environment by eliminating solvents.

MORESCO-MELT EP Series
It contributes to improving productivity and reducing energy use by eliminating the need for a drying process after hot melt coating, as well as improving the environment by eliminating solvents.
In addition, the use of a pseudo layer and an adhesive layer reduces the need for an intermediate base material (paper).

Organic photovoltaics
MORESCO-OPV Flexi
In addition to contributing to the reduction of greenhouse gases by creating renewable energy through solar power generation, CO2 emissions during manufacturing are also reduced to 1/5 and waste to 1/10,000 compared to silicon solar cells.
Being semitransparent and featuring a high-quality design, they can also function as an interior decoration when attached to windows to generate electricity.

Gas & water vapor transmittance measurement device
MORESCO-SuperDetect
Measures the gas barrier properties of films quickly and with world-class sensitivity and high precision. It contributes to R&D and quality control in various fields, including organic devices and solar cells, fuel cells, hydrogen energy, and food and medical product packaging.
Furthermore, the development of multi-chamber type equipment enables multiple sample measurements, reducing workload.
No petrochemical-derived raw materials are used for the main raw materials, and parts can also be reused.

UF/RO Membrane Wastewater Treatment Equipment UMO Series, MK Series
This is fully automatic wastewater treatment equipment that directly filters and concentrates wastewater using ultrafiltration (UF) and reverse osmosis (RO) membranes. By safely and reliably turning wastewater into clean water without human intervention (unmanned operation), the system contributes to the SDGs by reducing the amount of industrial waste, thereby reducing industrial waste treatment costs and the person-hours required. Since no wastewater treatment agents are used, the treated water can be recycled and reused to recycle water resources at the plant.

Batch Wastewater Treatment Equipment Non-oil Series
Batch wastewater treatment equipment for our wastewater treatment agent "Emulsion Breaker" that treats wastewater simply and inexpensively. By treating wastewater that is otherwise being handled as industrial waste in-house, we contribute to reducing the amount of industrial waste.
With a treatment capacity of 200 L to 2,000 L per batch, it is suitable for treating small amounts of wastewater, and its simple design saves energy (low GHG emissions) and space, and its easy operation is attractive.

Single-chemical Emulsion Breaker
The main feature of the single-chemical type is that it can easily treat wastewater. Simply add the prescribed amount to wastewater and stir for a certain period of time. Several variations are available for different types of wastewater.

Functional Emulsion Breaker
This product is effective when used in combination with general inorganic wastewater treatment agents.
We respond to customers' problems and needs with a variety of products tailored to different purposes and applications, such as improving the treatment accuracy of wastewater that is difficult to treat with general treatment agents, reducing the amount of sludge generated, decolorizing colored wastewater, and improving oil-water separation.

Lineup
Division | Product Group | Product Name | Environment Contribution Category |
Details of Environmental Contribution |
---|---|---|---|---|
Special lubricants |
Die casting lubricant |
Water-soluble minimum quantity spray type release agent GRAPHACE MQ Series |
Energy conservation Environmental conservation Building of a better workplace |
|
GRAPHACE | Reduction of CO2 emissions |
|
||
ASTROLUBE | Reduction of CO2 emissions |
|
||
Fire-resistant hydraulic fluid |
HYDOL | Reduction of CO2 emissions Environmental conservation |
|
|
HYDOL | Reduction of CO2 emissions |
|
||
Plunger lubricant |
NEOCASTER (RE Series) |
Environmental conservation Building of a better workplace |
|
|
NEOCASTER (Other than the RE Series) |
Reduction of CO2 emissions |
|
||
Vacuum pump oil |
NEOVAC | Reduction of CO2 emissions |
|
|
NEOVAC S | Reduction of CO2 emissions |
|
||
Forging lubricant |
LUBCASTER | Reduction of CO2 emissions |
|
|
Water-soluble cutting fluid |
MORESCO TOOLMATE GRINDSTAR 3000 | Environmental conservation Building of a better workplace |
|
|
MORESCO TOOLMATE GR-5 | Environmental conservation Building of a better workplace |
|
||
MORESCO TOOLMATE | Reduction of CO2 emissions |
|
||
IoT monitoring system | Reduction of CO2 emissions Energy conservation Environmental conservation Building of a better workplace Health and safety |
|
||
Synthetic lubricating oil |
High temperature lubricating oil |
MORESCO-HILUBE EX, BF Series | Energy conservation Environmental conservation Health and safety |
|
MORESCO-HILUBE LB Series | Energy conservation |
|
||
Radiation resistant lubricating oil and grease |
MORESCO-HIRAD | Environmental conservation |
|
|
Hard disk surface lubricant |
MORESCO PHOSFAROL | Contribution to industrial development |
|
|
Hot melts | Hot melt adhesive |
MORESCO-MELT RO-400 | Energy conservation Building of a better workplace |
|
MORESCO-MELT EP Series | Energy conservation Building of a better workplace |
|
||
Low-temperature coating type hot melt adhesive | Reduction of CO2 emissions Energy conservation |
|
||
MORESCO-MELT BM Series | Reduction of CO2 emissions |
|
||
Materials | NYBRINE | NYBRINE CONCENTRATE (for contractors) |
Reduction of CO2 emissions |
|
Bio-Nybrine FPD | Reduction of CO2 emissions Health and safety |
|
||
Liquid paraffin | MORESCO-WHITE P-260 | Energy conservation Building of a better workplace |
|
|
MORESCO-WHITE P-370HF (for pharmaceuticals) |
Health and safety |
|
||
MORESCO-WHITE P-350P (for PS) |
Health and safety |
|
||
MORESCO-WHITE P-70 (for cosmetics) |
Health and safety |
|
||
Devices | Gas & water vapor transmittance measurement device |
MORESCO-SuoerDetect (equipment sales and contract measurement) |
Reduction of CO2 emissions Environmental conservation Contribution to industrial development |
|
Organic photovoltaics (OPV) |
MORESCO-OPV Flexi (sales and contract production) |
Reduction of CO2 emissions Energy conservation Environmental conservation |
|
|
Organic device sealant | MORESCO MOISTURE CUT | Energy conservation |
|